Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 23 (kliknij aby zobaczyć)
External Sources
Tuner record timer setting
This function enables you to set a timer for starting and stopping ripping from the tuner source automatically. IMPORTANT! � Before setting the timer, ensure that the clock is set correctly. Notes: � It is impossible to set a sleep timer more than 12 hours later than the start timer. � During timer setting, if no button is pressed within 60 seconds, the system will exit timer setting mode automatically. To deactivate the TIMER � Press SLEEP/TIMER on the remote control. � disappears from the display. To activate the TIMER � Press SLEEP/TIMER on the remote control. � appears on the display. To view the set record timer
1 2
Tune to the station you desire to record from. (See "Radio Reception": "Tuning to radio stations" and "Tuning to preset radio stations".). Go to the standby mode. Then, press and hold CLOCK�TIMER on the system for more than two seconds to select timer mode. � The last timer setting starts flashing. � The selected source will be lighted. Press TUNER to select TUNER mode. Press USB RECORD to enable USB recording. � "ST" appears. �USB REC� and the hour and minute digits for the start timer start flashing.
3 4
1 2
In the standby mode, press and hold CLOCK�TIMER on the remote control to view the start timer setting. Press CLOCK�TIMER on the remote control again to view the sleep timer setting. To view remaining time during ripping
� To cancel USB record setting, press USB RECORD again until �ST� and "USB REC" disappear. � In this case, you can only continue to set the system switch-on timer. (See "Clock/Timer": "Timer setting".)
� After the tuner record timer starts, press SLEEP/TIMER on the remote control to view the remaining time of ripping. � To cancel the sleep timer, press SLEEP/TIMER repeatedly until "00" appears.
5 6
Press ALBUM -/+ 5 or 6 repeatedly to set the hour for the timer to start. Press TITLE -/+à or ë repeatedly to set the minute for the timer to start. � �ET� appears. and the hour and minute digits for the sleep timer (12 hours later than the start timer by default) star t flashing. Press ALBUM -/+ 5 or 6 repeatedly to set the hour for the timer to stop. Press TITLE -/+à or ë repeatedly to set the minute for the timer to stop. Press CLOCK�TIMER to store the set tuner record timer. � The ripping will start at the set start time and end at the set stop time.
