|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Connecting cables with a SCART socket
Connecting cables without a SCART socket
1 Remove the aerial cable plug from your TV set and insert
1 Remove the aerial cable plug from your TV set and insert
it into the
2
socket at the back of the video recorder.
3
it into the
2
socket at the back of the video recorder.
3
2 Plug one end of the aerial cable provided into the
2 Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the plug of a scart cable into the scart socket
socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the female plug of the mains cable into the mains
at the back of your video recorder. Connect the other plug to the TV set.
EXT.1
socket
4
at the back of the video recorder.
4 Plug the other end of the mains cable into the wall
socket.
5 Switch on your TV set and select the programme number
that you have earmarked for video playback. (see operating manual for your TV set).
4 Insert the female plug of the mains cable into the mains
socket
4
at the back of the video recorder.
6 Ensure that no cassette has been inserted. With the video
5 Plug the other end of the mains cable into the wall
socket.
recorder switched off, hold the SYSTEM button for a few seconds until a modulator frequency e.g.: �M583� (UHF-channel 35) appears in the display. The video recorder transmits a test picture.
7 Tune in the TV set in the UHF wave band until this picture
appears.
MODULATOR
583
------------------------/+ ON/OFF gCL OK
8 Switch off the video recorder with the
STANDBY m
but-
ton.
3
 $4.99 VR17505 PHILIPS
Schematy Zestaw schematów dla tego urządzenia. Plik PDF zawierający schematy będzie dostarczony na Twó…
|
